Portal:Wind power

Add links
From Wikipedia, the free encyclopedia
Portal topics
Activities
Culture
Geography
Health
History
Mathematics
Nature
People
Philosophy
Religion
Society
Technology
Random portal

The Wind Power Portal

The Gansu Wind Farm in Gansu, China
The Gansu Wind Farm in Gansu, China
An aerial view of the Power County wind farm in Power County, Idaho, with Nordex N100/2500 turbines
Shortcut

Wind power is the use of wind energy to generate useful work. Historically, wind power was used by sails, windmills and windpumps, but today it is mostly used to generate electricity. This article deals only with wind power for electricity generation. Today, wind power is generated almost completely with wind turbines, generally grouped into wind farms and connected to the electrical grid.

In 2022, wind supplied over 2000 TWh of electricity, which was over 7% of world electricity and about 2% of world energy. With about 100 GW added during 2021, mostly in China and the United States, global installed wind power capacity exceeded 800 GW. To help meet the Paris Agreement goals to limit climate change, analysts say it should expand much faster - by over 1% of electricity generation per year. (Full article...)

Selected article - show another

China is the world leader in wind power generation, with the largest installed capacity of any nation and continued rapid growth in new wind facilities. With its large land mass and long coastline, China has exceptional wind power resources: Wind power remained China's third-largest source of electricity at the end of 2021, accounting for 7.5% of total power generation.

In 2020, China added 71.6 GW of wind power generation capacity to reach a total capacity of 281GW. Both China's installed capacity and new capacity in 2020 are the largest in the world by a wide margin, with the next largest market, the United States, adding 14 GW in 2020 and having an installed capacity of 118 GW. (Full article...)
List of selected articles

General windmill articles

  • Image 1 The Wendhausen Windmill (German: Windmühle Wendhausen) is a tower mill located in Wendhausen, a town within the municipality of Lehre, Lower Saxony, Germany. Built in 1837, it is the only five-sailed windmill in Germany still in operation. (Full article...)

    The Wendhausen Windmill (German: Windmühle Wendhausen) is a tower mill located in Wendhausen, a town within the municipality of Lehre, Lower Saxony, Germany. Built in 1837, it is the only five-sailed windmill in Germany still in operation. (Full article...)
  • Image 2 Aerial view of Windpark Krammer , wind power in the Netherlands has an installed capacity of 11,611 MW, 40.9% of which is based offshore. In 2022, the wind turbines provided the country with 18.37% of its electricity demand during the year. Windmills have historically played a major part in the Netherlands by providing an alternative to water driven mills. In March 2022, the Dutch government announced that by 2030 offshore wind was to become the Netherlands' biggest power source, aiming at 21 GW of installed capacity. (Full article...)
    Aerial view of Windpark Krammer


    , wind power in the Netherlands has an installed capacity of 11,611 MW, 40.9% of which is based offshore. In 2022, the wind turbines provided the country with 18.37% of its electricity demand during the year. Windmills have historically played a major part in the Netherlands by providing an alternative to water driven mills.

    In March 2022, the Dutch government announced that by 2030 offshore wind was to become the Netherlands' biggest power source, aiming at 21 GW of installed capacity. (Full article...)
  • Image 3 View of the Bourne Windmill 1975 The Bourne Windmill, Oakdale, New York was an American farm design tower windmill, built in 1911 by Commodore Frederic G Bourne, as part of a farm in Oakdale, New York. It was located north of his South Shore estate, known as Indian Neck Hall, which later became LaSalle Military Academy. The windmill was demolished in 2004–2005. (Full article...)

    View of the Bourne Windmill 1975

    The Bourne Windmill, Oakdale, New York was an American farm design tower windmill, built in 1911 by Commodore Frederic G Bourne, as part of a farm in Oakdale, New York. It was located north of his South Shore estate, known as Indian Neck Hall, which later became LaSalle Military Academy. The windmill was demolished in 2004–2005. (Full article...)
  • Image 4 Ta' Kola Windmill in 2017 Ta' Kola Windmill, Maltese: Il-Mitħna ta' Kola, is a windmill in the village of Xagħra, on the island of Gozo in the Maltese archipelago. It was built in 1725 by the Fondazione Vilhena of Grand Master Manoel de Vilhena, and was rebuilt in the 1780s. It became a museum in 1992. Like many other Maltese windmills, it has a round central tower surrounded by a number of rooms. The sails and milling machinery have been restored, as have the miller's living-quarters. The museum also contains a large collection of traditional tools, mostly for wood- and iron-working. (Full article...)

    Ta' Kola Windmill in 2017

    Ta' Kola Windmill, Maltese: Il-Mitħna ta' Kola, is a windmill in the village of Xagħra, on the island of Gozo in the Maltese archipelago. It was built in 1725 by the Fondazione Vilhena of Grand Master Manoel de Vilhena, and was rebuilt in the 1780s. It became a museum in 1992.

    Like many other Maltese windmills, it has a round central tower surrounded by a number of rooms. The sails and milling machinery have been restored, as have the miller's living-quarters. The museum also contains a large collection of traditional tools, mostly for wood- and iron-working. (Full article...)
  • Image 5 Davidson Windmill is a historic windmill in Lakeside, Wisconsin, United States. The windmill was built in 1900 and added to the National Register of Historic Places in 1979. The grist mill was built by Jacob Davidson in 1904 and operated until 1926. (Full article...)

    Davidson Windmill is a historic windmill in Lakeside, Wisconsin, United States. The windmill was built in 1900 and added to the National Register of Historic Places in 1979. The grist mill was built by Jacob Davidson in 1904 and operated until 1926. (Full article...)
  • Image 6 Myreagre Mølle, Bornholm Myreagre Mølle (Myreagre Windmill) is a whitewashed tower mill located 3 kilometres (1.9 mi) east of Aakirkeby on the Danish island of Bornholm. Built in 1865, it remained in service until 1970. (Full article...)
    Myreagre Mølle, Bornholm


    Myreagre Mølle (Myreagre Windmill) is a whitewashed tower mill located 3 kilometres (1.9 mi) east of Aakirkeby on the Danish island of Bornholm. Built in 1865, it remained in service until 1970. (Full article...)
  • Image 7 The windmill in 2013 Waltham Windmill is a six-sailed windmill located in the village of Waltham, five miles from Grimsby in North East Lincolnshire, England. It is renowned in the area for having all six sails still in full working capacity, being one of the very few windmills like this in the United Kingdom. (Full article...)
    The windmill in 2013

    Waltham Windmill is a six-sailed windmill located in the village of Waltham, five miles from Grimsby in North East Lincolnshire, England. It is renowned in the area for having all six sails still in full working capacity, being one of the very few windmills like this in the United Kingdom. (Full article...)
  • Image 8 By 2012, Iran had roughly 400 power plant units. By the end of 2013, Iran had a total installed electricity generation capacity of 70,000 MW, which had been increased from 90 MW in 1948, and 7024 MW in 1978. It is planned to add more than 5,000 MW of generation capacity annually to the power grid, which will almost double the total power generation capacity to 122,000 MW by 2022. The government of Iran plans to privatize 20 power plants by September 2010. Iran's peak demand for electricity was 45,693 MW during the summer of 2013. It was predicted Iran accounts for 17.08% of MENA power generation by 2014. The natural gas was the major fuel used to generate electricity in Iran in 2009, accounting for an estimated 56.8% of primary energy demand (PED), followed by oil at 40.8% and hydro power at 1.4%. As of 2010, the average efficiency of power plants in Iran was 38 percent. The figure should reach to 45 percent within five years and 50 percent under Vision 2025. (Full article...)
    By 2012, Iran had roughly 400 power plant units. By the end of 2013, Iran had a total installed electricity generation capacity of 70,000 MW, which had been increased from 90 MW in 1948, and 7024 MW in 1978. It is planned to add more than 5,000 MW of generation capacity annually to the power grid, which will almost double the total power generation capacity to 122,000 MW by 2022. The government of Iran plans to privatize 20 power plants by September 2010. Iran's peak demand for electricity was 45,693 MW during the summer of 2013.

    It was predicted Iran accounts for 17.08% of MENA power generation by 2014. The natural gas was the major fuel used to generate electricity in Iran in 2009, accounting for an estimated 56.8% of primary energy demand (PED), followed by oil at 40.8% and hydro power at 1.4%. As of 2010, the average efficiency of power plants in Iran was 38 percent. The figure should reach to 45 percent within five years and 50 percent under Vision 2025. (Full article...)
  • Image 9 Boyd's Windmill, also known as Boyd's Wind Grist Mill, is a historic smock mill at Paradise Valley Park on Prospect Avenue in Middletown, Rhode Island. John Peterson built the windmill at the corner of Mill Lane and West Main Rd. in Portsmouth, Rhode Island in 1810, and William Boyd purchased it in 1815. It originally had four common sails, but four more were added by the family. The mill is a timber-frame structure, octagonal in shape, and about 30 feet (9.1 m) tall, with a rotating cap powered by eight vanes with canvas sheets. The grindstones in the middle of the mill are Fall River granite; the upper one, which is connected to the power mechanisms, rotates six times for each turn of the mill's main shaft. In 1916 Benjamin Boyd removed the original vanes and powered the mill using a gasoline engine. It is one of only two historic windmills (out of what was estimated to be more than thirty) to survive on Aquidneck Island. Boyd's Mill features prominently on the town seal of Middletown. (Full article...)

    Boyd's Windmill, also known as Boyd's Wind Grist Mill, is a historic smock mill at Paradise Valley Park on Prospect Avenue in Middletown, Rhode Island. John Peterson built the windmill at the corner of Mill Lane and West Main Rd. in Portsmouth, Rhode Island in 1810, and William Boyd purchased it in 1815. It originally had four common sails, but four more were added by the family. The mill is a timber-frame structure, octagonal in shape, and about 30 feet (9.1 m) tall, with a rotating cap powered by eight vanes with canvas sheets. The grindstones in the middle of the mill are Fall River granite; the upper one, which is connected to the power mechanisms, rotates six times for each turn of the mill's main shaft. In 1916 Benjamin Boyd removed the original vanes and powered the mill using a gasoline engine. It is one of only two historic windmills (out of what was estimated to be more than thirty) to survive on Aquidneck Island.

    Boyd's Mill features prominently on the town seal of Middletown. (Full article...)
  • Image 10 Tjasker Ossenzijl The tjasker (West Frisian: jasker, German: Fluttermühle) is a small type of windmill used solely for drainage purposes. It is distinctive for its simple construction, featuring only a single inclined shaft that carries the sails on one end and an Archimedes' screw on the other, in this way avoiding the need for any gearing. The tjasker is commonly known as a typical Frisian windmill though it is also found in other Dutch provinces and in north Germany. (Full article...)
    Tjasker Ossenzijl

    The tjasker (West Frisian: jasker, German: Fluttermühle) is a small type of windmill used solely for drainage purposes. It is distinctive for its simple construction, featuring only a single inclined shaft that carries the sails on one end and an Archimedes' screw on the other, in this way avoiding the need for any gearing. The tjasker is commonly known as a typical Frisian windmill though it is also found in other Dutch provinces and in north Germany. (Full article...)
  • Image 11 Danish Smock mill from 1895 at Sønderho, Fanø, with fantail A fantail is a small windmill mounted at right angles to the sails, at the rear of the windmill, and which turns the cap automatically to bring it into the wind. The fantail was patented in 1745 by Edmund Lee, a blacksmith working at Brockmill Forge near Wigan, England, and was perfected on mills around Leeds and Hull towards the end of the 18th century. Fantails are found on all types of traditional windmills and are especially useful where changes in wind direction are frequent. They are more common in England, Denmark and Germany than in other parts of Europe, and are little-known on windmills elsewhere except where English millwrighting traditions were in evidence. The rotating fantail turns the cap of the windmill via a system of gearing to a toothed rack around the top of the mill tower, or to wheels running on the ground in the case of a post mill. It does so until the fantail sails are oriented parallel to the wind, whereby the wind can no longer move them. When the fantail is oriented parallel to the wind, the main sails are in the optimal perpendicular orientation and produce maximum power. (Full article...)
    Danish Smock mill from 1895 at Sønderho, Fanø, with fantail

    A fantail is a small windmill mounted at right angles to the sails, at the rear of the windmill, and which turns the cap automatically to bring it into the wind. The fantail was patented in 1745 by Edmund Lee, a blacksmith working at Brockmill Forge near Wigan, England, and was perfected on mills around Leeds and Hull towards the end of the 18th century. Fantails are found on all types of traditional windmills and are especially useful where changes in wind direction are frequent. They are more common in England, Denmark and Germany than in other parts of Europe, and are little-known on windmills elsewhere except where English millwrighting traditions were in evidence.

    The rotating fantail turns the cap of the windmill via a system of gearing to a toothed rack around the top of the mill tower, or to wheels running on the ground in the case of a post mill. It does so until the fantail sails are oriented parallel to the wind, whereby the wind can no longer move them. When the fantail is oriented parallel to the wind, the main sails are in the optimal perpendicular orientation and produce maximum power. (Full article...)
  • Image 12 Blennerville Windmill The Blennerville Windmill is a 21.30 m high, stone, reefing stage, windmill in Blennerville, County Kerry, Ireland. The mill has five floors, ground floor, intermediate floor, grinding floor, stone floor and cap floor. (Full article...)

    Blennerville Windmill

    The Blennerville Windmill is a 21.30 m high, stone, reefing stage, windmill in Blennerville, County Kerry, Ireland. The mill has five floors, ground floor, intermediate floor, grinding floor, stone floor and cap floor. (Full article...)
  • Image 13 The mill c.1892 Ringle Crouch Green Mill is a smock mill in Sandhurst, Kent, England, that was demolished to base level in 1945, and now has a new smock tower built on it as residential accommodation and an electricity generator. (Full article...)

    The mill c.1892

    Ringle Crouch Green Mill is a smock mill in Sandhurst, Kent, England, that was demolished to base level in 1945, and now has a new smock tower built on it as residential accommodation and an electricity generator. (Full article...)
  • Image 14 This article lists all power stations in Uruguay. (Full article...)
    This article lists all power stations in Uruguay. (Full article...)
  • Image 15 A replica 18th century Dutch windmill fabricated recently in the Netherlands and then assembled on the shore of Lake Imba near Sakura, Japan, named in honour of 'The Love' (De Liefde), the first Dutch sailing vessel to reach Japan in 1600. Wind rights are rights relating to windmills, wind turbines and wind power. Historically in Continental Europe wind rights were manorial rights and obligations relating to the operation and profitability of windmills. In modern times, as wind becomes a more important source of power, rights relating to wind turbines and windmills are sometimes referred to as "wind rights". (Full article...)
    A replica 18th century Dutch windmill fabricated recently in the Netherlands and then assembled on the shore of Lake Imba near Sakura, Japan, named in honour of 'The Love' (De Liefde), the first Dutch sailing vessel to reach Japan in 1600.

    Wind rights are rights relating to windmills, wind turbines and wind power. Historically in Continental Europe wind rights were manorial rights and obligations relating to the operation and profitability of windmills. In modern times, as wind becomes a more important source of power, rights relating to wind turbines and windmills are sometimes referred to as "wind rights". (Full article...)
  • Image 16 Mountlucas Wind Farm in Co Offaly This is a list of wind farms in the Republic of Ireland. Locations of all the wind farms which have coordinates below, may be seen on a map together by clicking "Map of all coordinates using OpenStreetMap" at the right side of this page. (Full article...)
    Mountlucas Wind Farm in Co Offaly

    This is a list of wind farms in the Republic of Ireland. Locations of all the wind farms which have coordinates below, may be seen on a map together by clicking "Map of all coordinates using OpenStreetMap" at the right side of this page. (Full article...)
  • Image 17 Diagram showing an underdrift windmill This glossary of mill machinery covers the major pieces of machinery to be found in windmills, watermills and horse mills. It does not cover machinery found in modern factories. (Full article...)
    Diagram showing an underdrift windmill

    This glossary of mill machinery covers the major pieces of machinery to be found in windmills, watermills and horse mills. It does not cover machinery found in modern factories. (Full article...)
  • Image 18 Moulin de Craca. Moulin de Craca is a windmill in Plouézec, Côtes-d'Armor, France. First working in 1844 it was restored from 1995. It is popular amongst both locals and tourists because of its location on top of a cliff overlooking Port Lazo. Every August the Plouézec-Ballinamore twinning committee organises Noz Ar Vilin Fest Noz around the windmill. There is a selection of Breton and Irish music and dancing, as well as local cuisine and drinks. Amongst the specialities are Moules-Frites (Mussels and chips), Crêpes, Galettes, Breton cider, and Chouchen. (Full article...)

    Moulin de Craca.

    Moulin de Craca is a windmill in Plouézec, Côtes-d'Armor, France. First working in 1844 it was restored from 1995. It is popular amongst both locals and tourists because of its location on top of a cliff overlooking Port Lazo.

    Every August the Plouézec-Ballinamore twinning committee organises Noz Ar Vilin Fest Noz around the windmill. There is a selection of Breton and Irish music and dancing, as well as local cuisine and drinks. Amongst the specialities are Moules-Frites (Mussels and chips), Crêpes, Galettes, Breton cider, and Chouchen. (Full article...)
  • Image 19 Brill windmill, a 17th-century post mill in Buckinghamshire The post mill is the earliest type of European windmill. Its defining feature is that the whole body of the mill that houses the machinery is mounted on a single central vertical post. The vertical post is supported by four quarter bars. These are struts that steady the central post. The body of the windmill can be turned around the central post to bring the sails into the wind. All post mills have an arm projecting from them on the side opposite the sails and reaching down to near ground level. With some, as at Saxtead Green, the arm carries a fantail to turn the mill automatically. With the others the arm serves to rotate the mill into the wind by hand. (Full article...)
    Brill windmill, a 17th-century post mill in Buckinghamshire

    The post mill is the earliest type of European windmill. Its defining feature is that the whole body of the mill that houses the machinery is mounted on a single central vertical post. The vertical post is supported by four quarter bars. These are struts that steady the central post.

    The body of the windmill can be turned around the central post to bring the sails into the wind. All post mills have an arm projecting from them on the side opposite the sails and reaching down to near ground level. With some, as at Saxtead Green, the arm carries a fantail to turn the mill automatically. With the others the arm serves to rotate the mill into the wind by hand. (Full article...)
  • Image 20 Burgos Wind Farm in Burgos, Ilocos Norte This is an incomplete list of power plants present in Philippines. (Full article...)
  • Image 21 Old Mill buildings The Old Mill (Shenton's Mill) is a restored tower mill located on Mill Point in South Perth, Western Australia. Today, restored to its original 1830s condition, it is one of Perth's best known historic landmarks and serves as a sightseeing attraction. (Full article...)

    Old Mill buildings

    The Old Mill (Shenton's Mill) is a restored tower mill located on Mill Point in South Perth, Western Australia. Today, restored to its original 1830s condition, it is one of Perth's best known historic landmarks and serves as a sightseeing attraction. (Full article...)
  • Image 22 China has the world's largest capacity of offshore wind power, with 25 GW operational as of mid 2022. Offshore wind in China is growing rapidly, with 16.9 GW added during 2021. (Full article...)
    China has the world's largest capacity of offshore wind power, with 25 GW operational as of mid 2022.
    Offshore wind in China is growing rapidly, with 16.9 GW added during 2021. (Full article...)
  • Image 23 The Old Windmill, Observatory Park The Old Windmill is a heritage-listed tower mill in Observatory Park adjacent to Wickham Park at 226 Wickham Terrace, Spring Hill, City of Brisbane, Queensland, Australia. It was built in the 1820s by convict labour in the Moreton Bay penal settlement and is the oldest surviving building in Queensland. It is also known as Brisbane Observatory and Windmill Tower. It was added to the Queensland Heritage Register on 21 October 1992. Today it is the centrepiece of Observatory Park and a lookout over parts of the Brisbane CBD. (Full article...)

    The Old Windmill, Observatory Park

    The Old Windmill is a heritage-listed tower mill in Observatory Park adjacent to Wickham Park at 226 Wickham Terrace, Spring Hill, City of Brisbane, Queensland, Australia. It was built in the 1820s by convict labour in the Moreton Bay penal settlement and is the oldest surviving building in Queensland. It is also known as Brisbane Observatory and Windmill Tower. It was added to the Queensland Heritage Register on 21 October 1992. Today it is the centrepiece of Observatory Park and a lookout over parts of the Brisbane CBD. (Full article...)
  • Image 24 Montefiore Windmill, 30 March 2016 The Montefiore Windmill is a landmark windmill in Jerusalem. Designed as a flour mill, it was built in 1857 on a slope opposite the western city walls of Jerusalem, where three years later the new Jewish neighbourhood of Mishkenot Sha'ananim was erected, both by the efforts of British Jewish banker and philanthropist Moses Montefiore. Jerusalem at the time was part of Ottoman-ruled Palestine. Today the windmill serves as a small museum dedicated to the achievements of Montefiore. It was restored in 2012 with a new cap and sails in the style of the originals. The mill can turn in the wind. (Full article...)

    Montefiore Windmill, 30 March 2016

    The Montefiore Windmill is a landmark windmill in Jerusalem. Designed as a flour mill, it was built in 1857 on a slope opposite the western city walls of Jerusalem, where three years later the new Jewish neighbourhood of Mishkenot Sha'ananim was erected, both by the efforts of British Jewish banker and philanthropist Moses Montefiore. Jerusalem at the time was part of Ottoman-ruled Palestine. Today the windmill serves as a small museum dedicated to the achievements of Montefiore. It was restored in 2012 with a new cap and sails in the style of the originals. The mill can turn in the wind. (Full article...)

Topics

Wind power topics
Windmill topics
The windmills at Kinderdijk in the village of Kinderdijk, Netherlands is a UNESCO World Heritage Site

A windmill is a structure that converts wind power into rotational energy using vanes called sails or blades, by tradition specifically to mill grain (gristmills), but in some parts of the English-speaking world, the term has also been extended to encompass windpumps, wind turbines, and other applications. The term wind engine is also sometimes used to describe such devices. (Full article...)

Examples of multi-sailed windmills

Examples of tower mills

General images

The following are images from various wind power-related articles on Wikipedia.

Subcategories

List articles

Did you know...

Need help?

Do you have a question about Wind power to which that you cannot find the answer?

Consider asking it at the Wikipedia reference desk.

Related portals

WikiProjects

Associated Wikimedia

The following Wikimedia Foundation sister projects provide more on this subject:

Discover Wikipedia using portals

Purge server cache

Retrieved from "https://en.wikipedia.org/w/index.php?title=Portal:Wind_power&oldid=1138635137"